Turbine Series filter assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best performance. They remove contaminates from fuel using the following three-stage process:
Stage 1 Water Separation: As fuel enters the filter assembly, it moves through the centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage 2 Coalescing: Small water droplets bead-up on the surface of the conical baffle and cartridge element. When heavy enough, they too fall to the bottom of the bowl.
Stage 3 Filtration: Proprietary Aquabloc® cartridge elements surface coalesce remaining water and remove damaging hard and soft contaminants. They are waterproof and effective much longer than water absorbing elements.
- Replacement elements 2010SM-OR (2 Micron), 2010TM-OR (10 Micron), 2010PM-OR (30 Micron)
- Diesel Fuel / B20
- Flow Rate: 60 GPH
- Bowl Material: Clear Engineering Plastic Bowl with Stainless Steel Shield
- Port Size: 3/4-16 UNF
There are no reviews yet.